|
|||||||||||||||||||||||||||
 |
ELPRO datalogger series Ecolog-Net are designed for recording temperature and relative humidity via a network. The data is stored in the internal memory and can be loaded to the PC via the LAN network. The system offers the very highest of data safety as the datalogger continues logging for months, even in the event of a power failure, using its own internal lithium battery. Multiple level alarm features are built-in for local or network alarming, for any user set, out of range conditions. |
 |
| The Elpro data logging systems are the ideal solution for monitoring all relevant cleanroom parameters: Information such as CO2 level, pressure, differential pressure, temperature or relative humidity are continuosly recorded and and securely stored. The standard networking technology used (TCP/IP) allows a seamless integration into your existing LAN/WLAN networks. This provides around-the-clock monitoring of your critical cleanroom parameters using elproLOG software monitor. While observing regulatory compliance to FDA 21 CFR 11, GMP, GAMP4 and GLP, the validated Elpro Monitoring Solution offers you all the security you need when monitoring your regulated environments. Monitoring cleanroom conditions has never been so easy and secure. The ECOLOG-NET LA8 data logger is designed for operating with all commercially available 4..20mA transducers. To minimize installation effort, the transducers can be loop-powered. For GLP/GMP compliant Cleanroom documentation, up to eight transducers can be connected to one ECOLOG-NET LA8 data logger. |
 |
| 8-Channel datalogger with LAN interface and display |
| Voltage, Current, Humidity and temperature recording |
| Multifunction alarm output: LAN, LCD, buzzer, local connection |
| Rugged metallic case |
 |
| 4-Channel datalogger with LAN interface and display |
| Temperature range -200°C to +610°C |
| 3-wire or 4-wire PT100 sensors (RTD) |
| Suitable for cable lengths up to 70 M (low electrical interference) |
| Multifunction alarm output: LAN, LCD, buzzer, local connection |
| Rugged metallic case |
| Ecolog-Net LP4 as WLAN-type WP4 (standard IEE802.11b) |
 |
| 4-Channel datalogger with LAN interface and display |
| Humidity and temperature recording |
| 1x internal combined sensor |
| 1x external combined sensor, cable lengths up to 20 M |
| Multifunction alarm output: LAN, LCD, buzzer, local connection |
| Rugged metallic case |
| Ecolog-Net LH1 as WLAN-type WH1 (standard IEE802.11b) |
 |
| 4-Channel datalogger with LAN interface and display |
| Humidity and temperature recording |
| 2x external combined sensors, cable lengths up to 20 M (total length) |
| Multifunction alarm output: LAN, LCD, buzzer, local connection |
| Rugged metallic case |
| Ecolog-Net LH2 as WLAN-type WH2 (standard IEE802.11b) |
 |
An external supply is necessary for LAN/WLAN communication, external alarms and the online monitoring. In case of an interruption of this circuit the system changes over automatically to use the internal battery and the Ecolog-Net continues to save data. |
 |
|
|
 |
|
|
 |
 |
Home| Contact Us |